The ambiance of the kitchen changed instantly
These wall panels added a modern and stylish
Installation is quite simple, does not require a master. You can do it yourself or assemble it quickly with a few helpers
Feel like real brick
Robust, well made and easy to fit. Gives the right impression without the hassle of aligning individual brick slips, thank you.
Description
***If you're looking for a different wallcovering solution than painting,changing or applying wallpaper;
3D Wall Panels are the place to go!!!
3D Wall Panels can be easily installed without the need for a craftsman and guarantee a dust-free and clean installation. Needs no renovation,it has a long life.
| TITLE | INFORMATION | WHY STYROFOAM PANELS |
|---|---|---|
| Material | Eps | DIY Products |
| Price | By Board | Hardly flammable (B1) |
| m2 / piece | 0.5 m2 (5.38 sq. ft) | Easy To Install |
| Height | 50 cm (1.64 ft) | Thermal Insulations |
| Width | 100 cm (3.28 ft) | Resistant & Strong |
| Thick | 2 cm (0.07 ft) | Real 3D Brick Effect |
Cost savings
It does not cause problems such as dirt, dust or stains caused by natural stone or wallpaper and saves your budget such costs.it can be used for many years with its recyclable function and does not need to be replaced over time.
How many boards do you need ?
One board size is 50*100 cm.
For example, if your wall is 3.30 cm ( width ) x 2.60 cm ( length ) = 8.58 m2, almost 9 m2, you need to buy 9 m2 x 2 = 18 boards. (Only in case of cutting mistakes etc. it is recommended to take more than 1 or 2 boards for cases).
Important note
Due to the design and printing techniques of the products in our shop, colours may vary on average by 10% from the original products. There may be colour differences between the same models ordered at different times.
Use for exterior facades
Izodekor 3D wall panels can also be used for exterior applications.
It insulates from moisture, cold and heat and does not deform over time.
It is waterproof and also offers sound protection.
For bonding in the exterior you need a
cement-based exterior wall styrofoam adhesive. After gluing, you need to paint the panels with a water-based varnish. The reason you need to use varnish is to prevent fading from sunlight over time.